Category: Case Study

A customer from Leeds contacted us to inquire about the process of having their doors repainted in a new colour and whether we needed to assess the doors in person first. After walking them through the entire procedure from beginning to end, they were thrilled to learn how straightforward it was to initiate the project. Once they sent over some photos, I shared links to the RAL colour charts and the Farrow & Ball collection. To our delight, they opted for something a bit outside the usual trend of Anthracite grey. They chose Farrow & Ball Black Railings for both the interior and exterior of the back door, and Farrow & Ball Setting Plaster for the front door. Our team efficiently completed the work on both doors in just a few hours, allowing our customers to carry on with their day. Another extremely happy customer

We undertook the task of revitalising seven garage doors, aiming to give them a renewed appearance. The project required approximately five hours to reach completion. Our method involved meticulous preparation, utilising bagging and tapes to ensure precise application. For the desired finish, we opted for Ral 9010 white paint.

In Edinburgh, we efficiently removed graffiti using a combination of cleaners, bagging, Scotch techniques, mist coating, and two rounds of spraying with RAL 7016 paint. The entire process was completed in five hours.

As phase one of our ongoing project for the client, we adeptly applied RAL 7021 Black Grey Matt paint to the exterior surfaces of the curtain walling and doors.

All of the carousal and the swing door sprayed interior and exterior in RAL 7016 anthracite grey for a client at Rejus Ltd. for the entrance to a call centre in Doncaster.

Our team applied Black Ral no. BS-00E53 5ltrs to the top side and front aluminium sheeting between shutter doors, using bagging, tapes, and a scissor lift provided by the client.

The customer opted for Ral 7024 graphite grey for the original red window frames, door inside & out and the handrails, posts and boxes. We will be returning to complete the sign and shutters when the customer is ready. Step 1 all areas were cleaned and rubbed down of all flaking. Step 2 then all surrounding areas bagged and taped. Step 3 scotched the are in ready for two mist coats. Step 4 final coat of spray. We used Ral 7024 for the interior of the doors and the exterior of the windows, doors, handrails and posts. Materials – 5 ltrs of 7024.5 bagging & tapes.

The client had 18 windows, interior & exterior, sprayed in basalt grey RAL 7012. ​Step 1 all areas were cleaned and rubbed down of all flaking Step 2 all surrounding areas bagged and taped Step 3 scotched the are in ready for two mist coats Step 4 final coat of spray We used Cellimix for the 18 windows inside and out in RAL 7012 Basalt grey. Materials used, 15 x Bagging & tape, 15 litres paint.

From the original blue, we used Cellimix paint in RAL 7016, a portable compressor, bagging, tape, and sand. Primed and sprayed the blue areas in the climax Ral 7016 and the silver sign edge frames in Ral 9006 silver on this totem pole at the Gallagher shopping centre in Glasgow.

Our client’s beautiful spa had aluminium silver frames, they wanted a classy and more sophisticated look to the spa, so they opted for Traffic black 9017. Our client did not want to disturb any of their clients throughout the day, so we accommodated by carrying out the commercial spray works during the evenings.